Télécharger Imprimer la page

Telecom Behnke 5 Serie Notice page 53

Masquer les pouces Voir aussi pour 5 Serie:

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
Code
Parameter
Telephone number: Specification: cf. text
21
Telephone number
22
Telephone number
Telephone numbers only consist of cyphers and consist of max.
20 digits. When entering a telephone number, you may use the
following special characters:
*0
= dial *
*1
= dial #
*2
= Pause 2 seconds
*7 1 = Activate relay
*8 x y = wait for call answer (x=voice message to be played while
**0
= Hotline function
*#
= Flash function (150 ms)
**** = Hang up (in case the relay is still activated, it will remain
By default, button 1 is set to dial extension 11 and button 2 is set to
dial extension 12 (cf. 3.3 default configuration in connection with
an AC14 AGFEO telephone system)
Via configuration step codes 50 to 59 you may set-up the integrated voice message module.
Using the voice message module requires an additional 15 V power supply.
Reset the voice-module:
50
* * * *
Performing a reset will return configuration step codes 51 to 59 to
their default settings. Upon connecting the voice message module
and providing an additional 15 V power supply, all recorded voice
messages will be erased and the number of long voice messages
will be set to its default setting 1.
Specify the number of long voice messages: Default setting: 1
* * * Number of long voice messages
1 = 1 message
2 = 2 messages (message no. 6: 20 s and message no. 7: 20 s)
3 = 3 messages (message no. 6: 15 s; message no. 7: 15 s and
4 = 4 messages (message no. 6: 10 s; message no. 7: 10 s;
... continued on the next page
www.behnke-online.com
telephone number 1 (button 1)
telephone number 2 (button 2)
waiting for the call to be answered and y=voice message,
to be played after the call has been answered)
(requires an additional 15 V power supply)
activated until the activation interval has elapsed, then
the device will hang up)
(message no. 6: 40 s)
message no. 8: 10 s)
message no. 8: 10 s and message no. 9: 10 s)
Instructions series 5
Configuration and Set-up
Confirmation
#
#
#
GB
53

Publicité

loading