Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
▸
Answer an incoming call
Answer an incoming call either manually by
pushing a button or automatically after the
first recognised signal.
▸
Direct call: Dial a saved telephone number
after pressing the button
Up to two buttons may be used as direct call
buttons. The telephone number assigned
to these buttons may consist of up to 20
characters. The "pause" function is assigned
a special symbol, which may be included into
the saved telephone number. The amount of
time for the direct call button to be pressed
can be adjusted. By default a short touch is
sufficient to start a direct call. Via the option
"input delay for direct call buttons" the min-
imal amount of time for activation of a direct
call button can be set to values between 0
and 9 seconds.
www.behnke-online.com
▸
Control functions: automatic or manual relay
activation
To activate the relay, please enter the activa-
tion code followed by the # key. The activation
code may be entered during a remote connec-
tion using a telephone with DTMF dialling. A
maximum of two four-digit activation codes
may be saved. The activation interval may be
set to values between 1 and 30 seconds. The
connection will be terminated after the relay
has been activated, if desired. Upon estab-
lishing connection the activation interval may
be set to values between 1 and 30 seconds.
Instructions series 5
Introduction
GB
41
Publicité
