Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Problem
The relay activation
code does not acti-
vate the relay
Voice message,
illumination and
additional amplifier
do not work.
www.behnke-online.com
Cause
1) Wrong code or no code recorded
2) The telephone used for remote
configuration does not send
DTMF dialling tones.
No power supply available.
Instructions series 5
Trouble-shooting
Action
1) Via configuration steps 10 or 11
you may record two individual re-
lay activation codes. Depending
on the operations mode, these
codes may be used differently,
e.g. enabling or disabling the
relay or turning off completely.
Please refer to the chapter Con-
figuration and Set-up.
2) You need a telephone with DTMF
dialling (= a telephone that can
send DTMF dialling tones) for re-
mote configuration. Certain net-
work telephones require pressing
a button or entering an activation
code to send DTMF dialling
tones. For further information,
please contact your telephone
system administrator.
Check the correct installation of the
additional 15 V power supply. Using
voice messages, illumination and
the additional amplifier all require
an additional power supply.
GB
61
Publicité
