Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Problem
Changed settings
were not saved
www.behnke-online.com
Cause
Set-up mode was not enabled
Configuration step not terminated
with the # key
Improper value set or wrong button
pressed
Set-up mode terminated due to
inactivity for 30 seconds
Instructions series 5
Trouble-shooting
Action
Enter set-up mode and then enter
the configuration steps
Most configuration steps require
to be terminated by entering the
# key.
Entering improper values or press-
ing wrong buttons will result in the
Behnke Series 5 Intercom station to
terminate your entry and to produce
an error tone. Afterwards you may
start over again and try to correctly
enter the configuration required.
Your Behnke Series 5 Intercom
station will terminate set-up mode
after 30 seconds without any entry.
To enter further configurations,
please start over by entering set-up
mode.
GB
63
Publicité
