Publicité
Les langues disponibles
Les langues disponibles
Instructions series 5
GB
GB
Configuration and Set-up
Code
50
51
52
54
All manuals and user guides at all-guides.com
Parameter
The voice message module will store up to 5 short voice-messages,
each a maximum of 4 seconds long. Additionally, the module
will store longer voice messages of up to 40 seconds. Via the
configuration steps 1 to 4, you may divide these 40 seconds into
a maximum of 4 long voice messages. The maximum amount of
voice messages results from the 5 short messages and the set
number of long messages, i.e. according to your configuration you
will either have 6 (5 short + 1 long) up to a maximum of 9 (5 short +
4 long) voice messages available.
Please note: When changing the number of long voice messages,
all previously recorded long messages will be erased; the short
voice-messages will not be erased.
Record a voice message:
1 = Record voice msg. no. 1 (short msg.) 4 s
2 = Record voice msg. no. 2 (short msg.) 4 s
3 = Record voice msg. no. 3 (short msg.) 4 s
4 = Record voice msg. no. 4 (short msg.) 4 s
5 = Record voice msg. no.5 (short msg.) 4 s
Number of long voice messages:
6 = Record voice msg. no. 6 (long msg.)
7 = Record voice msg. no. 7 (long msg.)
8 = Record voice msg. no. 8 (long msg.)
9 = Record voice msg. no.9 (long msg.)
Voice messages can either be short messages or long messages.
There are 5 short messages (message no. 1 to message no. 5),
limited to a maximum of 4 seconds each. Message no. 6 is the first
long message. The number of long messages and their maximum
recording time may be set via configuration step code 50. Upon en-
tering configuration step code 51 and the respective number of the
message to be recorded, the device will produce a beep and start
recording. After the maximum amount of time for this message has
elapsed, the device will automatically stop recording. You may also
stop the recording process manually by pressing the # key.
Please note: You may only record the long messages no. 7; 8 and
9 after you have previously set a corresponding amount of long
messages under configuration step code 50.
Play a voice message:
1 = play message no. 1 (short msg.)
2 = play message no. 2 (short msg.)
3 = play message no. 3 (short msg.)
... continued on the next page
1
2
3
4
40 s 20 s 15 s 10 s
–
20 s 15 s 10 s
–
–
10 s 10 s
–
–
–
10 s
www.behnke-online.com
Confirmation
#
#
#
#
#
#
#
#
#
#
#
#
#
Publicité
