Olimpia splendid CALEO METAL Mode D'emploi Et D'entretien page 26

Knob "8" - Thermostat
• Start the appliance by pressing one or both
switches (10 and 11) based on the desired power
(see previous paragraph).
• To set the room temperature to a specific value
(thermostatation), rotate the knob "8" clockwise
until it stops.
• Once the desired temperature of the room
has been reached, slowly rotate the knob "8"
anticlockwise until the appliance switches off.
• At this point, the appliance will reactivate
automatically when the room temperature lowers
beyond the set limit and will switch off again once
the room temperature reaches the set value.
4 - OVERHEAT PROTECTION
• This heater is protected with overheat protection that switches off the appliance
automatically in case of severe overheating
In this case:
- unplug the appliance;
- wait about 30 minutes for it to cool;
- remove any possible cause of overheating, eg. something covering the heater;
- check for damage to the appliance, the cord and the plug.
• If there is no damage:
- plug the unit back in;
- switch it on as described above.
If the heater still does not turn on, please contact Customer Service for assistance.
5 - MAINTENANCE AND CLEANING
Before performing any cleaning or mainte-
nance intervention on the appliance, discon-
nect the plug from the power socket and wait
for the fan to stop completely.
• Use a dry cloth to clean the appliance.
• If the appliance is very dirty, it is possible to use a cloth dampened with warm water
(max 50°C) and a mild detergent to clean its external parts. Dry with a dry cloth.
EN - 10
10
11
8