Publicité
Les langues disponibles
Les langues disponibles
13. Electrical connections
6. ON-OFF switch
7. Power cable
8. BNC connector for pH or ORP probe
(NB : Floc version, no probe)
9. Suction tube union
10. Return tube union
Mounting the probe on the
BNC connector
14. Parameter setting and operation
14.1 BWT Easy Dose flocculant
Switch positions
1 : Normal dosing position
The pump runs at the selected speed when the device is powered on.
The pump speed can be set at between 10 and 100% of its maximum speed.
To set the pump speed, press the
displayed, then release it. 3 seconds later, the displayed value is saved to memory, and "mem" is displayed
on screen.
0: The pump is stopped.
TRAITEMENT DE L'EAU
key to scroll through the values until the required setting is
33
5
4
2
2023/04 - Indice de révision : A - Code : 29600
3
1
Publicité
