Publicité
Les langues disponibles
Les langues disponibles
10. General information
The BWT EASY DOSE analysing/ regulating system that you have just acquired is a high tech device, designed
and built with care to ensure your comfort and peace of mind. Its ease of use, simplicity and technical
sophistication will ensure absolute control over the quality of the water in your pool.
The BWT EASY DOSE analysing/ regulating systems are designed for family pools with a water volume
between 5 m3 and 130 m3 in the case of indoor pools and between 5m3 and 110 m3 in the case of outdoor
pools. There are 4 models available:
-
BWT EASY DOSE_pH: regulates the pH of the pool water, either by adding pH minus, or by adding pH
plus, depending on the pool's requirements.
-
BWT EASY DOSE_Redox: regulates the disinfectant concentration via the ORP value.
-
BWT EASY DOSE_Redox for electrolysers: regulates the disinfectant concentration in pools
equipped with a salt water electrolyser. It slaves operation (stop/ start) of the electrolyser in order to
attain a programmed ORP setpoint value, without exceeding it. It does not inject any product.
BWT EASY DOSE_Flocculnt: injects flocculant into the pool's hydraulic circuit at a constant rate.
-
We strongly advise against using these devices to regulate the treatment of water in spas that are
The use of probes or interfaces that do not comply with the technical characteristics set out
in this manual is prohibited.
The following instructions contain all the information you need to install, operate and maintain your new
equipment.
10.1 Storage and transport
Your BWT EASY DOSE must be stored and transported in its original packaging to prevent damage.
Environmental conditions for transport and storage:
Temperature : 0 °C à 60 °C
Air humidity: Maximum 90% without condensation
Non corrosive atmosphere, no solvent fumes
Disposal of packaging: Components made of paper, cardboard plastic or any other recyclable material should
be brought to a suitable sorting facility.
Disposal of the device at end of life:
10.2 Guarantee
The filter is covered by the provisions of legal consumer guarantees as regards compliance and protection
against hidden defects.
BWT POOL PRODUCTS also offers a sales guarantee which may only be activated if the product
was stored, handled, installed, used and maintained in accordance with the instructions set out in this
document.
Thus, this product benefits from a 2 year guarantee, offered by BWT POOL PRODUCTS, starting on the initial
date of invoice by BWT POOL PRODUCTS to the client company.
NOTA BENE: The probes, mounting kits, injection kits, tubing, standard solutions, end of tank valves are not
covered by the manufacturer's commercial guarantee.
TRAITEMENT DE L'EAU
WARNING
hydraulically independent of a swimming pool.
24
2023/04 - Indice de révision : A - Code : 29600
Publicité
