SOMFY CONTROL BOX 3S io Manuel D'installation page 62

Control Box 3S io
Memorising via the programming interface
If the installation already includes other io-homecontrol® products with at least one memorised bidirectional remote control, the Keytis io remote control
must first memorise the system key (see page 16).
• COMPLETE opening control
C1
• PEDESTRIAN opening control
C1 f0
2 s
• LIGHTING control
C1 f0
2 s
• AUXILIARY OUTPUT control (P15 = 4.5 or 6)
C1 f0
2 s
Memorising by copying a previously memorised Keytis io remote control
• Complete copying of a Keytis io remote control
This operation is used to copy all the buttons on a previously memorised remote control.
The new remote control must not be memorised for another automatic control system.
Ensure that the new remote control has memorised the system key.
[1]. Press the "pROg" button on the memorised remote control until the green indicator light comes on (2 s).
[2]. Briefly press the "pROg" button on the new remote control.
Wait for the second beep and the green indicator light to start flashing rapidly (a few seconds).
Remote control memorised
17
f0
2 s
f1
f1
f2
f1
f2
f3
Remote control to be memorised
Add C1
Add
Add
Add
Copyright © 2015 Somfy SAS. All rights reserved
C1
C1
C1