Introduction; Product Contents; Security Instructions - brennenstuhl Power Jet-Light 4 x 36 W IP 54 Mode D'emploi

Power Jet-Light 4 x 36 W IP 54
1

Introduction

This operating manual should be read completely and carefully.
It is part of your newly acquired product contains important instructions for the operation and handling. All
the security instructions are to be observed while using the product. The Power Jet- Light 4 x 36 W is a
work lamp with sockets is suited for placing, hanging and positioning as also as portable lamp for indoors
and outdoors.
In case of any questions with respect to the usage of the Power Jet- Light 4 x 36 W, please contact your
dealer or our service location. The operating manual is to be maintained and if necessary to be passed
on to third parties. The Power Jet-Light 4 x 36 W is called as work lamp hereinafter.
2

Product Contents

1 x light body including four illuminants
2 x Adjusting Screws
2 x U-Bolts
2 x Standing brackets
1 x Retaining brackets
1 x Operating manual
3

Security Instructions

IMPORTANT:
Please observe the following instructions in order to avoid injuries or material damages.
Operating environment: The work lamp is protected against dampness and splashing water. Please
note that the device is not waterproof.
DANGER: Failure to observe might lead to danger of life through electrical current.
The guarantee will not be valid in the case of damages that arise due to non-observance of this
instruction manual, especially the security instructions and handling.
No liability will likewise be assumed for subsequent damages.
The operating manual is to be maintained and if necessary to be forwarded to third parties.
The signals and symbols used in this operating manual have the following meaning:
Symbol
DANGER:
Significant risk of injury of persons
or danger to life in case of non-
observance
-
The work lamp is to be connected only to an earthed 230 V~ shockproof socket.
-
Operation of the work lamp in the case of identifiable defects is not allowed.
-
Never open the work lamp, except during insertion of the illuminant. Such interventions can mean
danger to life through electrical attack.
-
Arbitrary conversion, manipulation and/ or change of the work lamp are not allowed due to security
reasons.
-
Never look directly into the light.
-
The work lamp does not contain any parts that have to be maintained by the user.
-
Do not use the work lamp in explosion-prone environment, in which combustible liquids, gases or
dusts are present.
-
Please maintain the work lamp at a safe distance from children.
Operating Manual
Signal word/ Meaning Symbol
IMPORTANT:
What you need to note
14
Signal word/ Meaning
Status: 7201S-07-2007_K