Empire Comfort Systems DVCTL60CFP95N Instructions D'installation page 14

Sharp edges. Use protective gloves when installing.
Bench Installation
Remove Blower Access Panels. See Figure 5.
1.
2. Place Blowers onto blower brackets. See Figure 6.
3. Bend tab as shown in Figure 7 and secure with (2) screws.
HAND BEND
TAB INWARD
HAND BEND
TAB INWARD
Page 14
BLOWER INSTALLATION
CAUTION
Figure 5
Figure 6
Figure 7
4. Remove protective connectors on Wire Assembly from fireplace
and discard. Connect Wire Harness to both blowers and the
other end to the Wire Assembly supplied with the fireplace. See
Figure 8.
WIRE TO ASSEMBLY
5. Replace Blower Access Panels removed in step 1.
See Figure 5.
Installation After Placement Of Unit In Wall
1. Remove the following items. See Figure 9.
• Screen Barrier (See Maintenance and Service section for
instructions).
• Glass Frame Assembly (See Maintenance and Service
section for instructions).
• Liners (See separate liner instruction document).
2. Remove front and rear burner. See Figure 10.
(MODULE)
WIRE TO ASSEMBLY
(MODULE)
Figure 8
Figure 9
Figure 10
43902-0-1021