LG KG220 Mode D'emploi page 258

PCS only
According to depending on Network situation, you can
select PCS only.
GPRS
GPRS(General Packet Radio Service) is a technology
that allows mobile phones to be used for sending and
receiving data over the mobile network. GPRS is a
data bearer that enables wireless access to data
network such as the Internet.
Before you can use GPRS technology.
]
You need to subscribe to the GPRS service.
For availability and subscription to GPRS service,
contact your network operator or service provider.
]
You need to save the GPRS settings for the
applications used over GPRS.
If you select Switch On and you are in a network that
supports GPRS, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive a picture message, is
All manuals and user guides at all-guides.com
Menu 3-6
quicker. If you select When needed, the phone will use
a GPRS connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is no longer required by any application.
n
Note If there is no GPRS coverage and you have chosen
Automatic, the phone will periodically try to
establish a connection.
Memory status
You can check the size of free memory and available
memory of text messages.
Reset settings
You can reset your phone to its default configuration.
To do so, proceed, as follows.
1. Select the Reset settings menu option.
2. Enter the 4-digit security code.
n
Note The security code is preset to 0000.
Settings
Menu 3-7
Menu 3-8
49