Regular Maintenance; Cleaning Of Surfaces See Cleaning Instructions Manual Attached; Cleaning The Whirlpool Jets; Topping Up The Sanitizer Fluide - Teuco HYDROLINE Hydrosilence T50 Manuel De L'utilisateur

REGULAR MAINTENANCE

CLEANING OF SURFACES
See CLEANING INSTRUCTIONS
attached.

CLEANING THE WHIRLPOOL JETS

- Remove the jet cover (1) using the appropriate
tool supplied (refer to the chapter "hydromassage
jet").
- Rotate the jet outlet (2) in an anticlockwise
direction and extract all the parts contained in it
(3 - 4).
- Using the appropriate tool (5), remove the ring
(6) and the sphere (8).
- To clean the outlet, utilise limescale remover
and rinse with water.
- When reassembling the outlet, make sure that
the gaskets (2 - 9) are properly positioned in
their appropriate seats inside the outlet (10). To
obtain good functioning of the jet, screw the ring
(6) back into place without forcing it.

TOPPING UP THE SANITIZER FLUIDE

- Open the filler cap for the sanitizer (1) by turning
it anticlockwise.
- Pour in the sanitizer fluid.
- Screw the cap onto the sanitising liquid filling
tube (1) in a clockwise direction. Refer to page
13 for automatic sanification.
HYDROLINE
manual
10
9
8
7
6
5
4
3
2
5
1
1
EN
15