Automatic Sanitizing - Teuco HYDROLINE Hydrosilence T50 Manuel De L'utilisateur

EN

AUTOMATIC SANITIZING

- Get out of the tub.
- When in standby mode, the panel is lit at low
intensity.
- To start the sanitizing, press the SANITIZE key.
- Sanification starts, the SANIFICATION key
illuminates at high intensity and the HYDRO key
remains illuminated at low intensity.
- After 10 minutes, the sanification automatically
stops and the panel returns to standby.
- To stop the sanitizing process press the
SANITIZE key again.
- The display will go back to standby.
- After these operations, empty the tub.
If the level of sanitising liquid is insufficient, the SANIFICATION key flashes at low frequency
between low intensity and high intensity for 20 seconds whilst the hydromassage is in the start
phase. Top up with sanitising liquid. If the sanitising liquid is finished, the SANIFICATION key
flashes for 5 minutes, after which the panel returns to standby. Press a key to return to standby and
fill up with sanitising liquid (refer to DIAGNOSIS MESSAGES).
14
10min.
HYDROLINE