Event Definition - Abus TVIP62500 Manuel Utilisateur

Event Definition

Add: Adds a new event definition.
Duplicate: Copies the list entry and transfers it to a new event definition.
Edit: Edits the properties of a created event definition.
Rename: Renames an event definition.
Delete: Deletes an event definition.
Add
Name:
Alarm
Trigger:
Trigger Interval:
Schedule:
Trigger:
In:
Activates a motion window.
Schedule: Scheduled triggering of an action
Movement: The event triggering the configured motion detection.
Rebooting: The event triggering is the reboot.
Specifies the delay time before the next event can be detected (1–65534 seconds).
The trigger interval should not be less than 7 seconds as remaining event
actions are still being processed in this time.
Disable: Deactivates the event definition.
Always: The event definition is constantly activated with its parameters.
Manual: A schedule for the event definition activities can be defined here.
Start time: Start of the active time for the event definition.
End time: End of the active time for the event definition.
Enable: Activates the list entry. The list entry can be deactivated again later, when
necessary.
Add: Adds the set period to the list.
Example: "0:0" – "23:59" means that the action is activated until 23:59:59.
Minute "59" is fully counted in the activated time.
Motion Detection: The configured motion detection is the trigger.
System Startup: The system startup is the trigger.
Selection of the motion areas. Several motion areas can be used as a trigger in an
event action.
69