Event Definition - Abus TVIP62000 Manuel Utilisateur

Event Definition

Add: Adds a new event definition.
Duplicate: Copies the list entry and transfers it to a new event definition.
Edit: Edits the properties of a created event definition.
Rename: Renames an event definition.
Delete: Deletes an event definition.
Add
Name:
Alarm
Trigger Interval:
Schedule:
Trigger:
In:
Activates a motion window.
Specifies the delay time before the next event can be detected (7–99,999 seconds).
The trigger interval should not be less than 7 seconds as remaining event
actions are still being processed in this time.
Disable: Deactivates the event definition.
Always: The event definition is constantly activated with its parameters.
Manual: A schedule for the event definition activities can be defined here.
Start time: Start of the active time for the event definition.
End time: End of the active time for the event definition.
Enable: Activates the list entry. The list entry can be deactivated again later, when
necessary.
Add: Adds the set period to the list.
Example: "0:0" – "23:59" means that the action is activated until 23:59:59.
Minute "59" is fully counted in the activated time.
Motion Detection: The configured motion detection is the trigger.
System Startup: The system startup is the trigger.
Selection of the motion area. The three areas of motion detection can trigger different
events independently of each other (e.g. FTP upload to different servers, e-mail sent to
different recipients).
70