Information; Led; Administration; Logs - Abus TVIP62500 Manuel Utilisateur

Information

MAC address:
Model name:
Firmware version:

LED

Activate status LED

Administration

Configuration for saving/loading
Save:
Loading:
Restore:
Retain network settings:
Restart:
Update firmware:
Ensure that the power supply and network connection to the camera are not
disconnected under any circumstances during the entire update process.
The camera system can be damaged in this way.

Logs

Refresh:
Save Log Message:
Display of the MAC address of the camera (hardware address of the network
interface)
Camera model (item number)
Display of the firmware version installed
Ticking the selection box activates the status LED on the front side of the network
camera.
On: LED activated
Off: LED deactivated
Flashing: The LED flashes at a frequency of 1 flash per second.
Save the configuration file on the client PC
Load the configuration file
The network camera can be reset to the factory settings using this menu item.
Tick this selection box to reset all the parameters to the default settings, with
the exception of the network settings.
If you press the "Restart" button, the camera will be restarted.
The firmware on the network camera can be updated using this menu item.
The most recent firmware is available on the ABUS Security-Center homepage
(http://www.abus.com). Download this firmware to your computer first.
Press this button to update the log file display.
Option of saving the log file into a text file.
73