Video; Mjpeg; H.264 / Mpeg-4; Image Settings - Abus TVIP62500 Manuel Utilisateur

5.2 Video

MJPEG

Status display for stream 1 or stream 2:
Configuration:
Resolution:
Frame rate:
Quality:
Setting for stream 1 or stream 2:
Edit:
Region of Interest:
Resolution:
Frame rate:
Quality:

H.264 / MPEG-4

Status display for stream 1 or stream 2:
Configuration:
Resolution:
Frame rate:
Bit rate type:
Bit rate:
Quality:
GOP:

Image settings

Brightness:
Saturation:
Contrast:
Sharpness:
White Balance:
R-gain:
B-gain:
Rotation:
Stream 1 or stream 2 can be configured here.
Resolution currently set for stream 1 or stream 2.
Frame rate currently set for stream 1 or stream 2.
Quality settings for stream 1 or stream 2.
To edit stream 1 or 2, mark one of the two streams and press this button.
Use this function to limit transmission of a stream to a certain region of the video
image. This has the advantage that the available bandwidth is only provided for the
required region of the picture.
Select a certain size for the
Select a resolution for the MJPEG stream here.
Options: 1,920 x 1,080, 1,280 x 720
Select a frame rate for the MJPEG stream here.
Options: 1 ~ 25 frames / second
Image quality setting as a percentage
Stream 1 or stream 2 can be configured here.
Resolution currently set for stream 1 or stream 2.
Frame rate currently set for stream 1 or stream 2.
CBR: Constant bit rate with a variable quality.
VBR: Variable bit rate with a constant quality.
CVBR: The camera will try to maintain a certain quality, however will also try not to
exceed a maximum bit rate.
Setting for the video bit rate. When the camera is integrated into recorder systems, the
bit rate 6 MBit/s should not be exceeded.
Image quality setting as a percentage
[Group of Pictures]: H.264 and MPEG-4 are differential image procedures. This value
indicates how often a full image is transmitted between the differential images.
Brightness of the video image.
Saturation of the video image.
Contrast of the video image.
Sets the sharpness of the video image. A higher sharpness value increases the noise
in the video image.
Auto: The white balance is set automatically (range: 2,000– 9,500 K).
Red value setting for manual white balance.
Blue value setting for manual white balance.
Flip: Vertical mirroring of video image.
Mirror: Horizontal mirroring of video image.
64