Connection type X
If the mains connection cable of this product is dam-
aged, it must be replaced by a specially prepared
mains connection cable which can be obtained from
the manufacturer or its service department.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Engine data - type plate
13. Cleaning and maintenance
m Danger! Disconnect the mains plug before carrying
out any cleaning work.
Cleaning
• Keep protective devices, air vents and the motor
housing as free of dust and dirt as possible. Rub
the device clean with a clean cloth or blow it off with
compressed air at low pressure.
• We recommend that you clean the device directly
after every use.
• Clean the device at regular intervals using a damp
cloth and a little soft soap. Do not use any cleaning
products or solvents; they could attack the plastic
parts of the device. Make sure that no water can
penetrate the device interior. Water penetrating
an electric device increases the risk of an electric
shock.
Carbon brushes
If excessive sparks are generated, have an electrician
check the carbon brushes.
m Danger! The carbon brushes must only be replaced
by an electrician.
Maintenance
• A worn or damaged cutting roller should be re-
placed by an authorised specialist.
• Ensure that all fastening elements (bolts, nuts, etc.)
are always tightened so that it is safe to work with
the sweeper.
• Store your sweeper in a dry space.
• All screwed parts as well as the wheels and axles
should be cleaned and then oiled to ensure a long
service life.
• Regular maintenance of the sweeper will not only
ensure its durability and performance, but will also
help to scarify your lawn carefully and easily.
• Perform a general check of the sweeper at the end
of the season and remove all accumulated debris.
Always check the condition of the sweeper prior to
the start of the season. Contact our customer ser-
vice centre for repairs.
Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Brush, carbon brush
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
14. Storage
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
30 ˚C.
Store the product in its original packaging. Cover the
product to protect it from dust or moisture. Store the
operating manual with the product.
15. Disposal and recycling
Notes for packaging
Notes on the electrical and electronic equipment
act [ElektroG]
Electrical and electronic appliances do not
belong in household waste, but should be
collected and disposed of separately.
• Used batteries or rechargeable batteries that are not
installed permanently in the old appliance must be
removed non-destructively before disposal. Their
disposal is regulated by the battery act.
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
www.scheppach.com
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
GB | 25