Publicité
Les langues disponibles
Les langues disponibles
7.
Technical data
Mains voltage
Power consumption
Working width of
Depth adjustment
Sound pressure level L
pA
Sound power level L
wA
Uncertainty K
Vibration on the bar
Uncertainty K
Protection class
Protection category
Weight
Keep the noise level and vibration to a minimum!
• Only use faultless devices.
• Maintain and clean the device at regular intervals.
• Adapt your working methods to the device.
• Do not overload the device.
• Have the device checked if necessary.
• Switch the device off if it is not in use.
• Wear gloves.
8. Unpacking
• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
m WARNING!
The product and the packaging material are not
children's toys! Do not let children play with plas-
230-240V~ 50Hz
tic bags, films or small parts! There is a danger of
1500W
choking or suffocating!
320 mm
9.
-8 / +8 mm
82.8 dB
Before connecting the machine, make certain that the
data on the type plate matches with the mains pow-
98.89 dB
er data.
3 dB
1.344 m/s
2
m Warning!
Always pull out the mains plug before carrying out
1.5 m/s
2
adjustments on the device.
II
IPX4
The sweeper is disassembled on delivery. The catch
basket and the complete push bar must be fitted be-
10.1 kg
fore using the sweeper. Follow the instruction manual
step by step and use the figures as a guide to make
assembly easy for you.
10. Assembly
m Attention!
Always make sure the device is fully assembled
before commissioning!
Installing the push bar (Fig. 3 - 6)
• Insert the lower push bar (8) into the holes provided
• Secure the middle guide bar (6) using the clamping
• Slide the cable strain relief (B) onto the upper push
• Attach the upper push bar (3) to the middle guide
• Use the tensioning screw (5) and the fastening
• Fix the switch cable with the cable clamp (C) to the
Installing the catch basket (Fig. 7)
• Hang the catch basket (7) into the device. To do this,
www.scheppach.com
Before commissioning
and fasten the screws using a screwdriver (not in-
cluded in the scope of delivery).
screws (5).
bar (3).
bars (6).
screw (5a) to fasten the push bars (3) and the guide
bars (6).
push bars (3, 8) and the middle guide bars (6). (Fig.
8)
lift the discharge flap (9) and hang the catch basket
(7) into the appropriate bracket on the device.
GB | 23
Publicité
