Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
Assembly instructions
•
Please use an underlay, such as cardboard, to avoid scratching the floor
during assembly.
•
The screws and nuts are provided with a little grease to protect them from
corrosion. Please have a cloth ready to wipe your hands.
•
Some plastic end caps and plugs were fitted to the unit before delivery.
They are indicated on the assembly drawings as a reference in case spare
parts are needed.
•
The unit uses several different screw lengths. Pay attention to the correct
screw length for each assembly step.
Before you start the assembly
Find a comfortable place to work. Place your cross trainer in an open space
with adequate ventilation and lighting. As the cross trainer is portable to a
certain extent, you do not have to assemble it exactly where it is to be used.
For your comfort, however, you should avoid dragging the bicycle over too
great a distance, through narrow corridors or up stairs after assembly. If the
unit is to be installed in a living area, protect the floor or carpet with a large
mat before removing parts from the box.
EN
51
Publicité
