Led Lighting; Technical Problem - Novy Vision 7830 Mode D'emploi Et D'installation

4.4 Led lighting

Replacing the led lighting
First, remove the power supply from the hood and
allow
the lighting to cool down sufficiently.
Open the glass plate and remove the grease filters from
the hood. You can reach the 2 LED spotlights at the
bottom of the hood with your hand.
Removing the LED lamp
First disconnect the cable to the LED to be replaced.
Disconnect by means of releasing the lock, by applying
light pressure while at the same time pulling away.
Next, remove the LED to be replaced by making a gen-
tle rotating movement to the left.
Mounting the new LED
Place the new LED light into the locking ring.
Make a rotating movement to the right until the LED
light is locked. Connect the power cable.

4.4 Technical problem

In case of technical problems please contact Novy
Service Department:
• For Belgium: Tel.: 056/36.51.02
• For France: Tel.: 03.20.94.06.62
• For Germany: Tel.: 0511.54.20.771
For all other countries: your local installor or Novy Bel-
gium: +32 (0)56/36.51.02
Please supply us with the model number of your hood.
The model number can be found on the engra-
ved plaque behind the filter.
You can make a note of the number here:
.................................
Dimensions: p. 14-16
Electrical scheme: p. 17
EN 13