Replacing The Led Lighting - Novy Vision 7830 Mode D'emploi

Indication cleaning grease fi lter

Indication: 4 fl ashing indicator lights
After 20 cooking hours 4 fl ashing indicator LEDs show
that the grease fi lter must be cleaned.
Reset the cleaning indicator

When you replace the grease fi lter after clean-
ing, it is suffi cient to press the
seconds to again set the indicator.
If you do not do this the indicator light will continue to fl ash
when switching on the extractor hood.
Accessing the grease fi lter
Grip the glass plate (A) at the bottom left and right and pull
it forward. Open the glass plate so that the grease fi lter (B)
is visible. Protect the hob.
Protect the hob. You can take the grease fi lter (B) from
the hood by pulling the handle on the fi lter. The fi lter will
come down.
Cleaning the grease fi lter
The metal grease fi lter can be cleaned by hand or in a dish-
washer. We recommend cleaning the grease fi lter by hand.
Cleaning the fi lter by hand:
− Immerse the fi lter in a solution of boiling water to which
a degreasing detergent has been added.
− Use a brush for cleaning
− Then rinse the fi lters with warm water under a tap and
allow them to dry.
Cleaning the fi lter in a dishwasher:
− Use a customary dishwasher detergent
− Do not put the saturated grease fi lters together with
− Select a programme with a low temperature
− After cleaning allow the fi lter to drain.


Replacing the grease fi lters
− Before replacing the grease fi lter, clean the edges of the
key for 5
2
− Grasp the fi lter with 2 hands.
− Make sure that the lock or the lip on the fi lter is on the
− Insert the back of the fi lter in the opening, press the fi lter


3.3 Replacing the led lighting

Open the glass plate and remove the grease fi lters from the
hood. You can reach the 2 LED spotlights at the bottom
of the hood with your hand.
3.3.1 Removing the LED spotlight:
A. First disconnect the cable leading to the LED spotlight
B. Then remove the LED spotlight to be replaced by making
C. Remove the LED spotlight to be replaced from the
– 31 –
crockery in the dishwasher
When cleaning in a dishwasher the fi lter may
discolour as a result of the salt content. This
does not affect its operation.
part in the extractor hood in which the fi lter is placed.
bottom side.
upwards at the front and make sure it clicks tight.
You can obtain a new grease fi lter from a dealer
or the Novy website.
Article number grease fi lter: 7830.020 (2x).
First, remove the power supply from the hood
and allow the lighting to cool down suffi ciently.
to be replaced. Disconnecting is done by releasing the
lock by applying a light pressure and pulling it off at
the same time.
a soft rotating movement counterclockwise.
bayonet ring.