Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Activate or deactivate the hourly program for production of domestic hot water:
Programma dhw
Pr
OFF
ESC
D
• Set anti-Legionella cycle:
Trat. Antilegionella
22:16
LUN
MAR
MER
ESC
E
D
!
WARNING: In systems which use a storage
tank for the production of domestic hot
water, the anti-Legionella cycle must be
ACTIVE.
GIO
VEN
SAB
DOM
A specifi c hourly program (set in the TIME PERIOD menu) can be
associated to the production of domestic hot water. It will manage
the production of domestic hot water according to the hourly
settings it contains. To activate or deactivate the hourly program it
is necessary to:
(1) Enter modifi cation mode by pressing the
A
has been pressed, the setting currently in use will be highlighted;
B
(2) Press the
A
or
B
key to modify the setting;
C
(3) Press the
C
key to confi rm the selection;
After the work setting has been entered it will be possible to:
- Pass on to the following window by pressing the
- Go back to the previous window by pressing the
- Press the
D
key to return to the selection of the menus.
The anti-Legionella cycle heats the water stored in the tank at
a certain temperature for the time required to annihilate any
Legionella bacteria; to set this function is necessary to:
(1) Enter modifi cation mode by pressing the
has been pressed, the hour currently set to start the cycle will be
highlighted;
A
A
(2) Press the
key to increase the selected value or else press
B
B
the
key to decrease it;
(3) Press the
C
key to confi rm the selection and pass on to set
C
the minutes;
(4) Press the
A
key to increase the selected value or else press
the
B
key to decrease it;
(5) Press the
C
key to confi rm the selection and to pass on to set
the days in which the cycle will be performed; the fi rst day of the
week will be highlighted;
(6) Press the
A
or
B
key to select ( ) or clear ( ) the day
highlighted;
(7) Press the
C
key to confi rm the selection and pass on to set
the next day;
(8) Repeat points (6) and (7) for all the days of the week; after
having confi rmed the selection or clearing of Friday, the setting of
the anti-Legionella cycle will be concluded.
After having completed the setting of the anti-Legionella cycle, it
will be possible to:
- Enable or disable this function by pressing the
(represents the ENABLED status);
(represents the DISABLED status);
- Go back to the previous window by pressing the
- Press the
E
key to return to the selection of the menus.
C
key; after this key
A
key;
B
key;
C
key; after this key
D
key
B
key;
49
GB
6795770_02
Publicité
Chapitres
Table des Matières
