Set The Functioning Mode (Economy/Comfort) For The System; Set The Screen Saver - AERMEC VMF-E5 Manuel D'utilisation

• Set the functioning mode (ECONOMY/COMFORT) for the system:

Tipo di regolazione
ECONOMY
ESC
D

• Set the screen saver:

Screen saver
ESC
D
54
GB
6795770_02
03 min
On this window it is possible to set the functioning mode to
be activated on the system; the possible settings are:
- ECONOMY (the system activates an algorithm through
which the work setting of the chiller/heat pump varies
dynamically based on the real demand of the fan coils);
- COMFORT (the system will keep the work setting of the
chiller/heat pump steady as long as a fan coil demand is
A
active);
In order to set this value it is necessary to:
B
(1) Enter modifi cation mode by pressing the
C
this key has been pressed, the mode currently selected will
begin to fl ash;
(2) Press the A key to increase the selected value or else
press the B key to decrease it;
C
(3) Press the key to confi rm the value entered; once this
key has been pressed, the mode will have quit fl ashing, thus
indicating that the modifi cation procedure has concluded.
After having completed the setting of this function, it will be
possible to:
- Pass on to the following window by pressing the
- Go back to the previous window by pressing the
- Press the D key to return to the selection of the menus.
On this window it is possible to set the time you remain on
any page (other than the home page) after which, if no key
has been pressed, the system will return automatically to the
main window. Should you wish to disable this function you must
set this value at 0; in this case the icon displayed will pass from (
) to ( ); in order to set this time it is necessary to:
A
(1) Enter modifi cation mode by pressing the
this key has been pressed, the numbers which represent the
B
screen saver activation will begin to fl ash;
C
(2) Press the A key to increase the selected value or else
B
press the key to decrease it;
(3) Press the C key to confi rm the value entered; once this
key has been pressed, the numbers of the time will have quit
fl ashing, thus indicating that the modifi cation procedure has
concluded.
After having completed the setting of this function, it will be
possible to:
- Pass on to the following window by pressing the
- Go back to the previous window by pressing the
- Press the D key to return to the selection of the menus.
C key; after
A key;
B
key;
C key; after
A key;
B key;