HPT 200 • HPT 200C
Figure 8.1.-7. --> hiányzik a színesek közül
Installing a filter for the air input of the appliance. If the appliance is connected to an air
duct, a filter must be installed at the inlet of the air duct.
Figure 9.1.-8.
In order to ensure the continuous drainage of condensate water, please, install the ap-
pliance on a horizontal surface. If this is not feasible, please, ensure that the drainage
pipe branch is put in the lowest possible place. It is recommended to place the ap-
pliance in such way that the angle of inclination between the appliance and the vertical
plane should not exceed 2°.
44
Kondenzvíz
Condensate water discharge
elvezetés
HAJDU 200 9.1. 9-10. ábra.
Figure 9.1.-9.