hajdu HP-TOWER HPT200 Manuel De Mise En Service, D'opération Et D'entretien page 60

HPT 200 • HPT 200C
a two-pole switch with at least 3 mm separation distance between open poles.
Such isolation device must be incorporated in the fixed wire network.
• If the mains cable is damaged, it must be replaced in order to avoid any danger.
Such replacement must be performed by the manufacturer, its service support
or a similarly qualified professional.
• It is forbidden to use the HPT200(C) hot water tank outdoors or in a place ex-
posed to rain or moisture.
8
SERVICING
For regular inspections or if the appliance fails, contact the servi-
ce stations contracted with our company, whose list is included
in the List of Service Stations. If you are not satisfied with the
repair performed by such a service station, please, contact the
customer service of HAJDU Hajdúsági Ipari Zrt.
Contact details of our customer service:
Phone: +36 52 582-787
E-mail: vevoszolgalat@hajdurt.hu
ENVIRONMENTAL PRECAUTIONS
Please, note that, due to its decomposition attributes, the
product you purchased may damage the environment, and in
particular the soil and ground water after its useful lifecycle,
given that it contains parts (e.g. wires), for which the product is
considered hazardous waste.
Please, when reaching the end of service life, do not dispose of
the product along with the communal waste, but arrange for its
transportation to a company collecting electrical wastes or the
manufacturer. By taking measures for the proper processing or
recycling of the product after its useful lifecycle, we may promote
together the protection of the environment.