hajdu HP-TOWER HPT200 Manuel De Mise En Service, D'opération Et D'entretien page 62

HPT 200 • HPT 200C
The appliance produces hot water for domestic or similar use at temperatures under
the boiling point. For this purpose, the appliance must be hydraulically connected to
the domestic water pipeline. Electric current is also required for the operation of the
appliance. The usage of ventilation ducts is optional and it will be described later in
more details.
It is forbidden to use the appliance for other than its designated purpose. Any other
use of the appliance is considered to be improper and therefore forbidden. In particu-
lar, the appliance may not be used in industrial cycles and / or environments exposed
to corrosion or explosive materials.
The manufacturer and distributor shall assume no liability for damages arising from
unprofessional installation, improper or wrong use, reasonably unforeseeable use, or
incomplete or careless compliance with the instructions included in the manual.
Persons with reduced physical, perceptive or mental abilities (including children) or per-
sons without complete knowledge and experience concerning the appliance are not
permitted to use the appliance, unless supervised by a person responsible for their sa-
fety or given adequate information on the operation of the appliance. The supervision
of children is required to prevent them from playing with the appliance.
The manufacturer is responsible for ensuring that the appliance complies with all
construction guidelines, laws and requirements effective at the time of the first com-
mercial launch of the product. Under their respective control, the constructor, user and
installation technician are exclusively responsible for the knowledge of and compliance
with legal requirements concerning the construction, installation, operation and main-
tenance of the appliance. References in this manual to laws, requirements or technical
specifications are for information only. Newly adopted laws or amendments of effective
laws shall impose no obligation on the manufacturer to third persons in any way.
In order to underline the importance of warnings of dangers associated with the instal-
lation and operation of the appliance, the following symbols are used.
Failure to observe the warning may result in serious injury or, in certain cases,
death even.
Failure to observe the warning may result in damages, or cause harms to
the building, the plants or animals.
Compulsory compliance with the general and specific safety instructions re-
lated to the product.
Parts or points written after the expression "WARNING!" and/or written in bold type
contain important information or recommendations and it is indispensable to observe
these and comply with them.
10
1.2. Areas of use
1.3. Instructions and technical standards
1.4. Explanation of symbols used