Publicité
Les langues disponibles
Les langues disponibles
STEP 5: HANDLE ASSEMBLY
First remove the screws (35) and corrugated washers (11) from the handle support (18). Guide the pulse cables (13)
through the large hole in the handle support (18) and upwards through the opening. Then fix the handle (6) to the
handle support (18) with the screws (35) and corrugated washers (11). Be careful not to pinch any cable!
STEP 6:
COMPUTER ASSEMBLY
Connect the sensor cable (17) and the
pulse cables (13) to the corresponding
connectors (1a/1b) on the computer (1).
Then mount the computer (1) with 4
screws (12) on top of the handle support
bracket (18).
25
SET-UP INSTRUCTIONS
Publicité
