Publicité
Les langues disponibles
Les langues disponibles
21
SET-UP INSTRUCTIONS
STEP 1: ATTACHING THE STABILIZERS
First attach the front and rear stabilizer (34=front and 47=rear) to the main frame (29). This requires 2 screws (20)
and 2 washers (26) each, which you must first remove from the respective stabilizer. Tighten the connections well.
The height adjusters on the rear stabilizer (47) must be used to compensate for any unevenness of the floor. To do
this, turn the adjusters until the unit stands firmly and without wobbling on the floor. The front stabilizer (34) is
equipped with castors to make it easier to move the unit from place to place (Attention: To protect the floor, place
a pad underneath!).
Publicité
