Publicité
Les langues disponibles
Les langues disponibles
24
SET-UP INSTRUCTIONS
STEP 4: SWING BAR ASSEMBLY (LOWER PART)
Remove the bolts (40 & 41), spring washers (42), nuts (43 & 44), as well as the bolts (22), nuts (23), washers (26) and
corrugated washers (27) from the tread struts (32 or 33).
Fit the right (32) and left (33) tread struts to main frame (29) with the bolts (40 & 41), spring washers (42) and nuts
(43 & 44) as shown. Then connect the front of the tread struts (32 or 33) to the two lower swing bar ends (28L &
28R). For this you need the bolts (22), nuts (23), washers (26) and corrugated washers (27).
Publicité
