Publicité
Les langues disponibles
Les langues disponibles
MACHINE MAINTENANCE:
All service performed should be completed by persons who understand
the machine or an AUTHORIZED SERVICE CENTER. It is recommended
that only authorized repair parts be used for service.
FOR SAFETY: When servicing the machine disconnect the battery
connection and battery charger plug before working on the machi-
ne.
MAINTENANCE CHECK LIST
The belts for slackening
The tightness of nuts and screws
The brushes for wear
The gaskets for wear and leakages
If all the functions are in working order
Empty hopper
SIDE BRUSH REPLACEMENT:
Raise the front part of the machine.
Slide the new brush until it locks into place.
MAIN BRUSH REPLACEMENT:
X
X
X
X
X
X
X
X
X
X
X
X
X
CLEANING AND SERVICING THE FILTERS:
the best performance from your machine.
Pre-Filter
Clean Daily
Main Filter
every 3 minutes.
order: press the button marked 'E' and hold it downfor a few seconds.
Repeat this operation 4 or 5 times.
cleaning session. It is recommended to carry this good idea to use the
are deactivated.
EN
Tilt the machine backwards until the handle is touching the
ground and the main brush is easily reached.
Manually turn the brush until a black button is seen on the right
hand side of the brush core.
Press the button and push to dis-engage the brush.
Insert the new brush following the guide.
7
Publicité
