Panasonic PV-GS55 Manuel D'utilisation page 68

≥When playing back MPEG4 data recorded on
other equipment, a part of the playback elapsed
time may be indicated as [--] or the date and
time display will be different from it when
recorded.
≥If you attempt to play back a file recorded on
other equipment, the [UNPLAYABLE CARD]
Indication may appear and the playback may
not be possible. Or during playback, the
[UNPLAYABLE CARD] Indication may appear,
the playback picture may be presented in a
time-lapse-like manner, or the picture and the
sound may not synchronize.
ª Slide Show
≥It may take playback time longer than usual
time depending on the picture.
ª Creating a Title
≥When setting to MPEG4 Playback Mode, Title
Creation Function is not possible.
≥Even if the contrast of the Title is adjusted, the
portions where there is little difference between
light and dark and where the boundary between
light and dark is unclear may not appear.
≥The Title may not appear well if something
small is used for it.
≥If titles are created, the number of images that
can be recorded on a Card decreases.
≥If the number of images that can be recorded on
a Card is small, you may not be able to create a
title.
ª Adding a Title
≥When setting to MPEG4 Playback Mode, Title
In Function is not possible.
≥The Title In Function and Digital Effects cannot
be used simultaneously.
≥The Title In Function and RapidFire
Consecutive Photoshot cannot be used
simultaneously.
≥When a title is displayed in Tape Playback
Mode, the title is not output from the DV
Terminal.
≥The Multi-Picture Mode cannot be used once
the title is inserted.
≥A full-colored title made on other equipment
cannot be played back or added to the picture
with this Palmcorder.
≥A title with size of other than 640k480 pixels
cannot be displayed.
≥When recording MPEG4 moving pictures is in
progress, Title in Function cannot be used.
≥When the title is displayed or the Multi screen,
the recording and the playback cannot be
performed.
≥During external input or DV input, you cannot
use Title In Function or display titles on the Multi
screen. Select the desired titles to display them
on the screen before connecting the cable to
the Palmcorder.
Others
ª DPOF
≥Perform the DPOF Settings with your
Palmcorder.
≥Verifying the DPOF Settings may take a little
time. Wait until the Card Access Lamp goes out.
ª Lock Setting
≥The Lock Setting carried out by this Palmcorder
is only effective for this Palmcorder.
≥The SD Memory Card has a write protection
switch on it. If the switch is moved to the [LOCK]
side, you cannot write to or format the Card. If it
is moved back, you can.
≥The MPEG4 data recorded by another
Palmcorder may not be able to cancel the lock
setting.
ª Playing Back on Your TV
≥Depending on your TV, nothing may be shown
even if you correctly connect the Palmcorder
with your TV. In this case, set [AV JACK] on the
[AV IN/OUT] or [INITIAL] Sub-Menu to [OUT].
≥If you set [AV JACK] on the [AV IN/OUT]
Sub-Menu to [IN/OUT], nothing will be shown
on the TV screen except during playback.
≥Picture size may be displayed differently when
playing back a Cinema picture on a wide-screen
TV with Playback Digital Effect.
≥We recommend setting the [SCREEN] on the
[DISPLAY] Sub-Menu to [NORMAL] when
playing back MPEG4 on TV.
ª Recording Pictures from a Card onto a
Tape
≥When recording the Card Image on a Tape, its
size is transformed into 720k480 pixels
according to the DV format.
≥If you attempt to record a still picture with a
large image size on a Tape, there may be a
reduction in the quality of the image.
≥The MPEG4 data cannot be recorded on a
Tape.
ª Audio Dubbing
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot
be dubbed.
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
≥If you set the tape counter back to 0 at the
position where you want to stop Audio Dubbing
so as to make it possible to use the Memory
Stop Function (
-75-
terminated automatically when the tape reaches
this position.
≥In the case of importing data recorded with
Audio Dubbing to a PC using the PC's software,
only the original sound (ST1) may be imported,
depending on the software.
-68-
), Audio Dubbing is