Eneo VKC-1327C/W3 Guide D'installation Rapide page 19

DAY/NIGHT AUTO
3D-NR -
PICT ADJUST -
SPECIAL -
SAVE&EXIT
EXIT -
The Full Manual is available from the eneo web site at
www.eneo-security.com or from the CD supplied with this product.
All manuals and user guides at all-guides.com
DAY/NIGHT mode is available for EXT, AUTO, CO-
LOR and B/W.
EXT must be selected only for a camera with IR
LEDs.
EXT - DAY/NIGHT is switched by a built-in light sen-
sor on LED board.
AUTO – DAY/NIGHT is decided and switched by
the image processoralong with the amount of light
through the lens independent from the light sensor.
BURST, DELAY CNT, D→N THRES and N→D THRES
can be set in AUTO mode. BURST mode setting
here applies to EXT and B/W mode too.
COLOR – DAY/NIGHT function is disabled.
B/W – DAY/NIGHT is fixed to NIGHT mode and the
IR cut filter is switched out forcibly
Sets LEVEL of 3D-NR to reduce the noise.
Sets WHITE BAL, CONTRAST, SHARPNESS, HUE,
R-GAIN, B-GAIN and D-EFFECT(MIRROR, DIS,
EZOOM).
Sets MOTION DET, PRIVACY, CAMERA ID, LAN-
GUAGE, PIXEL COMP and FACTORY RESET.
Saves all parameters by pressing ● and exits the
setup menu
Exits the setup menu without saving.
To save the changes, move cursor to ‚SAVE & EXIT'
and press ● before exiting the setup menu
Further information
DE
EN
FR
PL
RU
19