Eneo VKC-1327C/W3 Guide D'installation Rapide page 17

3. Loosen ⓒ Zoom adjustment knob and adjust the zoom setting.
4. Loosen ⓑ Focus is adjustment knob and adjust the focus.
5. Tighten both locking screws ⓑ + ⓒ when adjustment is done. Close the
housing.
Setup menu can be accessed and controlled by OSD control joy stick on
the side of camera.
Five commands are available with the joy stick.
▲,▼,◄,► denotes the directions of
Joystick lever operation.
● denotes Pressing straight down of
Joystick lever
In the menu, use ▲,▼ to move menu, ◄,► to change the settings and press
● to select or enter.
FACTORY DEFAULT values in this manual may NOT be the same as the
default values by FACTORY SET due to the changes for the improvements
or the customer's requirements.
All manuals and user guides at all-guides.com
Camera setup
17
DE
EN
FR
PL
RU