Publicité
TIMER DELAY
The TIMER can be set for a 1 to 24 hour delay
until the air conditioner turns on or off.
Press
or
to adjust the delay time.
To set the TIMER delay to turn the air
conditioner off, air conditioner must be in the
ON mode.
Press TIMER ON/OFF. (Indicator light will
flash.)
Press
or
to change delay time (1 to 24
hours).
Press TIMER ON/OFF or wait 10 seconds. (Indicator
light will remain on.)
To operate air conditioner with remote control
Note: Two AA batteries (not
included) power the remote
POWER
ON/OFF
control. Replace batteries after
six months of use, or when the
AutoCool
remote control starts to lose
Cool
Turbo
power. Be sure to install
batteries with correct polarity.
Fan Only
High
FAN
SPEED
Power Saver
Low
Temp / Time
Timer
To turn the air conditioner on or off,
press the Power ON/OFF button.
To raise the temperature, press
the
button. Each time you press or hold
the
button, the temperature will go up
1° until it reaches 86°F.
To lower the temperature, press
the
button. Each time you press or hold
the
button, the temperature will down 1° until it
reaches 64°F.
6
All manuals and user guides at all-guides.com
TIMER
ON/OFF
POWER
ON/OFF
Temp / Time
To set the TIMER delay to turn the air conditioner on,
air conditioner must be in the OFF mode.
If you want to change the previous settings:
Turn air conditioner on.
Adjust MODE to AUTO, COOL, FAN, or POWER
SAVER.
Adjust FAN SPEED to TURBO, HIGH or LOW.
Adjust TEMPERATURE between 64°F and 86°F.
Turn air conditioner off.
Press TIMER ON/OFF. (Indicator light will flash.)
Press
or
to change delay time (1 to 24 hours).
Press TIMER ON/OFF or wait 10 seconds.
If you want to keep the previous settings:
Turn air conditioner off.
Press TIMER ON/OFF. Indicator light will flash.
Press
or
to change delay time (1 to 24 hours).
Press TIMER ON/OFF or wait 10 seconds.
To clear TIMER delay program, press and hold TIMER
ON/OFF for 3 seconds. Indicator light will shut off. Air
conditioner can be either on or off.
To see the remaining time (in hours), press TIMER
ON/OFF once after it has been programmed. While
the display is showing the remaining time, you can
press
or
to increase or decrease the time.
To select the mode, press the AutoCool,
Cool, Fan Only, or Power Saver button.
When air conditioner is operating in
AutoCool mode, fan speed is adjusted
automatically. When air conditioner is
operating in Fan Only mode, fan speed is
automatically set at Turbo. When air
conditioner is operating in Cool or Power
Saver mode, you can adjust the fan speed.
To select the fan speed (in Cool or
Power Saver mode only), press the
Turbo, High or Low button.
To set Timer for a 1 to 24 hour delay
until air conditioner turns on (air
conditioner must be in OFF mode):
1. Press the Timer button.
2. Press the
button to change delay time
(1 to 24 hours).
3. Press the Timer button again or wait 10 seconds.
To set Timer for a 1 to 24 hour delay until air
conditioner turns off (air conditioner must be
in ON mode):
1. Press the Timer button.
2. Press the
button to change delay time
(1 to 24 hours).
3. Press the Timer button again or wait 10 seconds.
AutoCool
Cool
Fan Only
Power Saver
Turbo
High
FAN
SPEED
Low
Timer
Publicité
