Baby Lock Endurance II Mode D'emploi page 4

Pattern Type Selection Screen
The pattern type selection screen slightly differs
from the screens listed in the Instruction and
Reference Guide. For details on the patterns
displayed when each key is pressed, refer to the
Quick Reference Guide.
Checking the Needle Drop Point with LED Pointer
The LED pointer shows you the location of the
needle penetration so that it is easier to adjust the
embroidery position.
1 Needle drop point
All manuals and user guides at all-guides.com
Additional keys
The LED pointer turns on automatically while the
embroidering screen appears, and it turns off when
you start embroidering. You can set the LED pointer
function on or off in the settings screen.
2
Press this key to select
one of the ten patterns
that were added.
Press this key to select
one of the patterns that
was available with
in the previous
version (excluding
Press this key to select
or
available with
the previous version.
provides patterns used
with examples in the
Instruction and Reference
Guide.
provides patterns used
for checking the thread
tension. For details on
checking the thread tension,
refer to page 67 in the
Instruction and Reference
Guide.
Note
● The LED pointer may not be available
depending on the type of embroidery
frame attached.
● With fabric that has a very uneven or
textured surface, the position of the LED
pointer may not be correctly aligned. In
this case, the pointer indication should be
used only as a reference.
).
, which were
in