Baby Lock Endurance II Mode D'emploi page 16

b To open another pattern sent from the
computer, touch
procedure starting from step
embroidering.
• To stop embroidering or to embroider the
same pattern again, touch
Note
● The embroidering screen settings specified
0
in step are saved even if
touched to continue sewing after
embroidering is finished.
Memo
● If the embroidery machine is turned off
while it is embroidering, the resume
operation can be used the next time it is
turned on.
All manuals and user guides at all-guides.com
, and then repeat the
8
to continue
.
was
14
Disabling the Link function
1 Touch , and then touch
to display page 5 of the machine settings
screen.
2 Touch to disable the Link function.
When the following message appears,
touch .
3 Turn off the machine.
or