5
Turn on the machine.
6
Using embroidery editing software provided
with the Link function, such as Palette 9, or
later, will allow you to send the embroidery
pattern(s) to the machine in the Link mode
from your computer.
7
When the following message appears, touch
.
A message appears in the machine's LCD
while the machine is connecting to PC.
All manuals and user guides at all-guides.com
12
Note
● For details on using the embroidery editing
software, refer to the Instruction Manual
included with the software.
* This Link dialog box is found in Palette 9
software.
● If the following error message appears, the
type of embroidery frame installed on the
machine is not compatible with the size of
the pattern. Replace the embroidery frame
with one compatible with the size of the
pattern.