Toro Z Master HDX SD 2000 Serie Manuel De L'utilisateur page 9

112-3858
1. Read the Operator's
Manual.
2. Read the Operator's
Manual before performing
maintenance.
112-9028
1. Warning—stay away from moving parts; keep all guards
and shields in place.
116–5610
1. Hour meter
2. Power take-off (PTO)
3. Parking brake
decal112-3858
3. Remove the key before
adjusting the height of cut.
4. Height-of-cut settings
decal112-9028
decal116-5610
4. Neutral
5. Operator-presence switch
6. Battery
1. Read the Operator's Manual.
2. Rotate the drive release knob to loosen, slide the knob,
and tighten.
3. Push the machine.
1. Belt routing
1. Cutting/dismemberment hazard, fan and entanglement
hazard, belt. Shut off the engine and remove the key before
adjusting, servicing or cleaning the machine.
7
116-8588
117-1194
2. Engine
126-4363
decal116-8588
decal117-1194
decal126-4363