Angelcare AC701 Manuel De L'utilisateur page 99

TO STOP THE ALARM
Press any key on
the Parent Unit
to put on Hold
Place your
hand back
on the mattress.
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
1
Level 1
Level 2
Level 3
3
Level 4
Level 5
TO ACTIVATE THE TIC FUNCTION:
This allows you to hear a 'TIC' sound with baby's movements
(when the movement detection is ON)
1
NOTE:
When the Movement Mode
is set to OFF, the TIC Mode
is automatically set to OFF.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older
than 24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby's
crib and store it away.
All manuals and user guides at all-guides.com
OR
(see step 6.5)
4
2
OR
Press Nursery
Unit's Hold button
(see step 6.5)
Hold down left 'wing'
button for two seconds
to turn OFF the Unit
1) Press Settings icon to access setting mode.
2) Press Movement Sensitivity icon.
The icon will blink.
3) Use the (+) or (-) on the right side of
the Parent Unit to choose the desired
sensitivity level (1 to 5) OR press the
movement sensitivity icon
to choose the desired sensitivity level.
4) Press Return icon to confirm your choice
and return to normal screen.
NOTE:
If you are receiving false alarms,
adjust the sensitivity level.
NOTE:
Whilst in Setting mode, if after 30 seconds
no adjustments are made, the unit will go back
to normal and no update will be done.
1) With ECO mode switched off, press TIC
icon to activate or deactivate the 'TIC'
function.
ON
If the TIC icon is activated (and ECO mode
switched off) a regular TIC sound will emit
from Parent Unit.
NOTE:
When using ECO mode, the TIC function
shuts off.
OFF
99