eufy Security FLOODLIGHT CAM 2 PRO Guide Rapide page 7

2. Run the existing wire through the hole.
If you don't have existing wires outdoors, contact a licensed
electrician to run the wires.
3. Install the junction box:
• Orient the two mounting holes vertically to ensure stable mounting.
• On wooden walls, DO NOT pre-drill holes. Use the screws provided to
fix the junction box onto the wall.
010 EN
• On walls that are made out of hard materials, such as stucco, brick, or
concrete, drill holes with a 15/64 inch (6 mm) drill bit, and then insert
the anchors provided into the holes. Use the screws provided to fix
the junction box on the wall.
1
4. Unscrew the bolt with a flat-head screwdriver. Connect the Neutral (blue)
/ Ground (green / green and yellow) / Live (brown) wire to the Neutral /
Ground / Live wire connector in the junction box respectively. Secure the
wires tightly to prevent wires from falling.
Neutral
Ground
N
Live
L
1
2
2
EN 011