eufy Security FLOODLIGHT CAM 2 PRO Guide Rapide page 6

Make sure you can livestream video from Floodlight Camera
before mounting.
If the Floodlight Camera LED keeps blinking red, it means the floodlight
is not connected to the Internet. Please make sure the Wi-Fi signal is
strong at the desired location. You may consider moving the wireless
router closer to Floodlight Camera or using a Wi-Fi range extender.
PREPARING FLOODLIGHT CAMERA FOR
INSTALLATION
1. Unplug the power adapter. Close the mounting base, and then close the
USB port cover to keep water from entering the Floodlight Camera.
The USB port cover must be closed to keep water from entering
the Floodlight Camera.
008 EN
2. Shut down the circuit breaker in your house. Switch on/off the lights to
make sure the electricity in your house is properly shut off.
To avoid risk of shock, injury or death, always be cautious when
working with electricity.
INSTALLING THE JUNCTION BOX
1. Remove the rubber plugs indicated in the illustration below.
EN 009