eufy Security FLOODLIGHT CAM 2 PRO Guide Rapide page 12

4. Snap the camera onto its base.
5. Adjust the angle as mentioned in the section "Adjusting the Lighting
Angle" to get the best view.
6. Remove the label and protective film on the Floodlight.
Clean the camera with the provided lens cleaning cloth.
020 EN
7. Switch on the main circuit breaker in the house.
In case Floodlight Camera is not powered on, switch off the
circuit breaker before checking the wiring of Floodlight Camera.
To avoid risk of shock, injury or death, always be cautious when
working with electricity. Remember, do hire a professional
electrician if you're uncomfortable working with electrical wiring.
ADJUSTING THE LIGHTING ANGLE
1. Turn the knobs counter-clockwise to extend the Floodlight. Adjust the
Floodlight horizontally and then tighten the knobs by turning them clockwise.
EN 021