Husqvarna POLO Manuel D'instructions page 9

GUARANTEE AND GUARANTEE POLICY
f any part is found to be defective due to faulty manufacture
I
within the guarantee period, Husqvarna Outdoor Products,
through its Authorised Service Repairers will effect the
repair or replacement to the customer free of charge
providing:
a) The fault is reported directly to the Authorised Re-
pairer.
b) Proof of purchase is provided.
c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
d) The failure has not occurred through fair wear and
tear.
e) The machine has not been serviced or repaired, taken
apart or tampered with by any person not authorised by
Husqvarna Outdoor Products.
f) The machine has not been used for hire.
g) The machine is owned by the original purchaser.
h) The machine has not been used commercially.
 This guarantee is additional to, and in no way diminishes
the customers statutory rights.
Failures due to the following are not covered, therefore
it is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
EC DECLARATION OF CONFORMITY
I, the undersigned Bengt Ahlund, of Husqvarna Outdoor Products Italia Spa, Via Como 72, 23868 Valmadrera (LC).
Certify that the Petrol Wheeled Rotary:
Category .................................................................Petrol Wheeled Rotary
Make .......................................................................Husqvarna Outdoor Products
Conforms to the specifications of Directive 2000/14/EEC
Type ........................................................................A
Version....................................................................B
Width of cut.............................................................C
Guaranteed sound power level...............................D
Measured sound power level..................................E
Sound pressure livel at the ear ...............................F
Vibration of the handle ............................................G
Diameter of cuttersr ................................................H
Cutter rpm...............................................................I
(See the last page for references)
Working equipment .................................................4/6 star cutter with 4 cutting tools each
Type of Cutting Device ............................................Rotary Blade
Identification of Series ............................................See Product Rating Label
Conformity Assesment Procedure ..........................ANNEX VI (<3kW), ANNEX V (>3kW)
Notified Body. .........................................................Nr. 0470 - NEMKO AS
Other Directives ......................................................98/37/EC, 2002/88/EC, 2004/108/EC
& applicable standards normative ..........................EN709,EN ISO14982,EN1033,EN ISO 3744,EN ISO11201
All manuals and user guides at all-guides.com
Failures not covered by guarantee
- Replacing worn or damaged blades
- Failures as a result of not reporting an initial fault.
- Failures as a result of sudden impact.
- Failures as a result of not using the product in accordance
- Machines used for hire are not covered by this gua-
- The following items listed are considered as wearing parts
- CAUTION!
Gaustadalleen 30 - PO Box 73 Blindern
0314 OSLO - Norway
with the instructions and recommendations contained in
this Operator's Manual.
rantee.
and their life is dependent on regular maintenance and
are, therefore not normally subject to a valid warranty
claim: Blades, Electric Mains cable, Belt
Husqvarna Outdoor Products does not accept liability
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts
or additional parts that are not either manufactured or
approved by Husqvarna Outdoor Products, or by the
machine having been modified in any way..
Technical Manager
Husqvarna Outdoor Products Italia spa
Via Como 72 - 23868 Valmadrera (LC)
7
ENGLISH -