Proxxon FF 400 Manuel page 12

Operating manual
Milling machine PF 400/
Compound table KT 400
Milling machine with compound
table FF 400
Foreword ....................................................................12
Description of the machine..........................................13
Construction............................................................13
Scope of supply ......................................................13
KT 400 ................................................................13
PF 400 ................................................................13
FF 400 ................................................................13
General Arrangement,
milling machine PF 400 (Fig. 1) ..............................13
General Arrangement,
compound table KT 400 (Fig. 2) ............................13
Technical data for PF 400 milling machine ............13
Technical data for KT 400 compound table ............14
Assembling the milling machine ..................................14
Fixing to the PD400 lathe........................................14
Fitting the milling machine to the
KT 400 compound table ..........................................14
Working with the milling attachment ............................14
Spindle height adjustment ......................................15
Height adjustment using the hand wheel............15
Feeding by means of the drill lever ....................15
Swivelling the milling spindle ..................................15
Swivelling about the vertical access ..................15
Swivelling about the longitudinal access ............15
Fitting the collets ....................................................15
Setting the spindle speed........................................16
Milling ..........................................................................16
Setting the depth of cut ..........................................16
Feed........................................................................17
Accessories ................................................................17
Repair and maintenance ............................................17
Changing the belts ..................................................17
Adjusting the play in the compound table guides
(here FF 400 and KT 400 only) ..............................18
Lubricating the machine..........................................18
Cleaning and care ..................................................18
Disposal ..................................................................18
EC Declaration of Conformity......................................18
Spare parts lists ..........................................................76
Milling attachment PF 400 (24304) ........................79
Compound table KT 400 (24303)............................77
- 12 -
All manuals and user guides at all-guides.com
Foreword
Dear Customer,
This manual deals with the PF 400 and the associated
compound table KT 400. It is directed at our customers
who have either purchased the compound table, the
milling attachment or both together as the FF 400. Re-
gardless of your choice, read this manual before using
your machine. Pay particular attention to the safety in-
formation and always work with great care.
The use of this manual
•
•
•
Always keep this manual ready to hand.
Only operate this equipment if you have a thorough
knowledge of it and in accordance with the manual.
PROXXON shall not be liable for the safe operation of
the equipment in the case of:
•
•
•
You will have no claim under the warranty in the case of:
•
•
•
For your own safety, please be sure to observe the sa-
fety regulations. We reserve the right to make improve-
ments in the interest of technical progress. We wish
you every success with the equipment.
makes it easier to get to know the equipment.
prevents faults caused by incorrect operation and
increases the life of your equipment.
handling, which is not in accordance with
normal use,
other purposes, which are not mentioned in
the manual,
non-observance of the safety regulations.
operator errors
lack of maintenance
use of non-PROXXON spare parts