Maxi-Cosi CabrioFix Mode D'emploi page 41

• To install CabrioFix, place the infant carrier
rearward facing on the passenger seat.
Route the webbing of the-2point safety belt
through the belt guides. (1,2)
Lock the buckle of the 2-point safety belt. (3)
And tighten the 2-point safety belt by pulling
on the tightening strap. (4)
• The handle of the CabrioFix must be in
upright position.
• The belt buckle must not be positioned
between the belt hooks of this car seat.
Otherwise a safe attachment does not exist.
• To uninstall CabrioFix, open the buckle of the
2-point safety belt by lifting the lever of the
buckle. (5)
And remove the webbing of the 2-point safety
belt from the guides. Make sure the CabrioFix
does not fall from passenger seat when
opening the buckle.
• The CabrioFix must remain belted on the
aircraft seat, even when unoccupied.
• The CabrioFix is only for use on an aircraft
seat authorized by the airline.
• Do not install the CabrioFix in the area of
airbag deployment.
• Instructions of the cabin crew must be
followed.
• The safety of your child for not complying
with the installation and instruction manual is
not guaranteed.
Maintenance CabrioFix
The cover, cushions and belt pads of the
CabrioFix can be removed in order for these to
be cleaned (also see washing instructions).
EN
I I
Maxi-Cosi CabrioFix 43