Noise Data - Ammann AVP 1240 H Mode D'emploi

4. Speed
Speed
5. Vibration
Vibration force
Vibration frequency
6. Working surface
Working surface
7. Spec. surface pressure
Spec. surface pressure
8. Optional equipment
Water tank 10 l
Water tank 5 l
Undercarriage
Vibration damped towbar
9. Noise and Vibration data
The following listed noise and vibration data according to the EC machine directive in the version (91/368/EEC) was determined
at the rated speed of the drive motor with vibration with the machine placed on a resilient base.
Values can deviate in normal use depending on the conditions prevailing at the place of use.

9.1 Noise data

The noise emission specified in appendix 1, subclause 1.7.4.f of the EC machine directive for:
the sound pressure level at the
operator place is L
PA
Measured sound power level L
Guaranted sound power level L
The noise levels were measured according to ISO 3744 for the sound power level (L
(L ) at the operator workplace.
PA
9.2 Vibration data
(basic unit / vibration damped towbar)
Hand-arm vibration values according to appendix 1, sub-clause 3.6.3.a of the EC machine directive:
The weighted effective value of
acceleration, determined according
to ISO 8662, part 1, is
*Since the permissible noise rating level of 89 dB(A) can be exceeded with this machine, the operator must wear suitable
hearing protection.
AVP 1240 H
0.14 m²
8.6 N/cm²
X
—
X
X
103 dB
WA,m
WA,g
5.3 / 1.2 m/s²
AVP 1250
max. 20 m/min
12 kN
98 Hz
0.18 m²
7.2 N/cm²
X
—
X
X
91 dB
105 dB
108 dB
WA
23
2. Technical Data
AVP 1850 H AVP 1850
18 kN
85 Hz
0.20 m²
9.0 N/cm²
X
—
X
X
93 dB
106 dB
) and ISO 6081 for the sound pressure level
5.8 / 2.4 m/s²
1B20
—
X
X
X
94 dB