Roche Bobois LIFT Notice De Montage Et D'entretien page 13

LIFT
- Buffet - Sideboard - Aparador
design Sacha Lakic
Retainer
wedges
2.4 Unscrew the 4 nuts (Fig. 10)
2.5 Unscrew the threaded rods (Fig. 11) and take the metal turntables off
Fig. 10
2.6 Remove and turn the top (Fig.13) to take the rail's diffusion layer off. Change the flexible leds
and proceed of the reassembly taking the steps in reverse.
Fig. 9
Fig. 11
5
Lifting by hand
Fig. 8
Through the
opening under the
top, disconnect the
wire coming from
the leds of the
distributor