Publicité
Les langues disponibles
Les langues disponibles
LIFT
- Buffet - Sideboard - Aparador
design Sacha Lakic
1. Open the hatch located underneath the piece of furniture.
2. Activation of the learning process
2.1. Active the learning process pressing down the button of the RFR case with a pencil
or a similar tool.
2.2. Keep the button « RESET » pressed and press one of the buttons of the remote
control. During this operation, the old codes of the remote control are deleted in favour of the new
ones.
2.3.
Release the « reset » button
If any button of the remote control is activated during the process, nothing will be modified.
Some equipments using the same signal typology 433 MHz can distort the signal (Some bells of
door for example)
1. REPLACEMENT OF THE LEDS LIGHTING OF THE MOBILE ELEMENT
It is necessary to take the mobile element from the piece of furniture out.
1. Disengage the mobile part from the sideboard
1.1 Raise the mobile part until the top with the remote control or with the button located under the
sideboard at the left side (Fig .5)
1.2 Unscrew with the allen key n° 2.5 the 10 scre ws of the tray (Fig.6)
1.3 Remove the top tray (Fig.5).
1.4 Unscrew and remove only the 4 fixation screws in the center of each metal sheet of each telescopic
column (fig.7) with the key n° 4. Be careful : Now you have released both jacks.
Long-life batteries
(non-replaceable)
3
Publicité
